Nozzle - Select Mini V1

(4 reviews) Write a Review
Maximum Purchase:
10 units
Calculated at Checkout


Compatible with:

  • Most Monoprice MP Select Mini V1*

* Some V1's purchase around the release date of the V2 may have a different nozzle which would be the same as the V2. If your printer has a heater block that measures 20 x 20 x 10mm then chances are your printer has a V1 nozzle. If your printer has a 16 x 16 x 12mm heater block then your printer probably has the same nozzle as the V2's.

These nozzles have an overall length of 10mm
Threads are M6x1.0 with a 5mm length
Nozzle opening diameter is 0.4mm 

4 Reviews Hide Reviews Show Reviews

  • 5

    Posted by Andrew on Mar 19th 2019

    Excellent products, exactly what i needed to fix my 3d printer.

  • 5
    Gteat replacement nozzle

    Posted by Charlie1001 on Mar 12th 2019

    My Monoprice 3d printer came back to life with this little replacement.

  • 5
    Same size as the original nozzel

    Posted by Andrew Y on Feb 20th 2019

    Same size as the original nozzel with different extruder hole sizes. These fit perfect, just line the original nozzel. Price is awesome and shipping is fast!

  • 5
    Exact replacement

    Posted by Andrew Y on Feb 20th 2019

    Exact same size as the original nozzel that came with the printer. The V1 has a slightly smaller height nozzle that's hard to find. This replacement will make it so you don't have to adjust the bed down lower or have to adjust the position sensor. I recommend putting a thin layer of heat transfer paste (the same stuff you'd use on a PC processor heat sync) on the threads of the nozzle. Noticed better heat transfer after doing this.