Bowden Coupling / Connector for the Updated Extruder / Feeder Mechanism

$2.00
(12 reviews) Write a Review
SKU:
PC4-NEW
Minimum Purchase:
2 units
Maximum Purchase:
20 units
Shipping:
Calculated at Checkout
Quantity Buy 3 - 5 Buy 6 - 10 Buy 11 - 20
Per Piece and pay only $1.85 each and pay only $1.70 each and pay only $1.50 each
Bowden Coupling / Connector for the Updated Extruder / Feeder Mechanism

This product comes with no guarantee that the metal ring/teeth will not break similar to what may be the reason you are seeking a replacement.

This part is for use with the Updated Version of the Extruder / Feeder Mechanism.

Compatible with:

  • Monoprice MP Select Mini V2 - Check the product pictures to see if it matches what is on your printer
  • Monoprice MP Mini Delta - Check the product pictures to see if it matches what is on your printer

This model on Thingiverse is designed to keep the new extruder type but print an adapter to be able to use a standard PC4-M6 Bowden connector instead of the new style that seem prone to breaking.

https://www.thingiverse.com/thing:2793080

Here are some printable replacement extruders/feeder mechanisms on Thingiverse - Thingiverse Collection of Extruders for the Mini Delta and Select Mini

12 Reviews Hide Reviews Show Reviews

  • 5
    Boden thingy

    Posted by Tyler on May 16th 2018

    Works great!

  • 5
    Bowden Coupling / Connector for the Updated Extruder / Feeder Mechanism

    Posted by Jack on May 14th 2018

    It was the right part, easy to install and worked right away. Time will tell if it's more durable than the original part... but so far much joy.

  • 5
    Worked

    Posted by Squez on May 13th 2018

    Replaced my cold end Bowden fitting and did a 4.5 hour print job. Worked perfectly. Ordered 3. Recommend hand feeding the filament until it comes out of the extruder to save some wear on the fitting (until you can print a new feeder part to accept the threaded pc4 coupling)

  • 5
    BOWDEN COUPLING / CONNECTOR FOR THE UPDATED EXTRUDER / FEEDER MECHANISM

    Posted by Michael Brinatte on Apr 25th 2018

    Very nice and easy to replace, they may be fragile, but I ordered a couple of extras due to the good price.

  • 5
    Coupling

    Posted by Brandon on Apr 20th 2018

    This fix my 3d printer and it is back up and running.

  • 5
    Works perfectly

    Posted by MrSonicOSG on Apr 18th 2018

    It was a drop in replacement for the OG part, worked perfectly out of the box. I am honestly considering getting a couple more in case I get another lemon of a printer.

  • 5
    Quality Replacement for the Mini Delta

    Posted by Adam van Bergeijk on Apr 16th 2018

    The connector that came attached to the extruder on my MP Mini Delta failed after about 200 hours of print time, so I ordered these as a direct replacement. Installed in five minutes, and the printer was happily going again shortly afterwards. Excellent!

  • 5
    Did the job

    Posted by Matt on Apr 3rd 2018

    Replaced the part and it did exactly what it was supposed to.

  • 5
    MP Mini Delta Bowden Coupling

    Posted by Todd Naber on Mar 30th 2018

    After I used up the first roll of Monoprice PLA, I ended pulling out the Bowden Tube and the Bowden Coupling broke off. I ordered this Connector to remedy the replacement of the 'Brass' Coupling and its worked great upon re-installation. I wish a 'Spare Parts Bag' was available for the MP Mini Delta... otherwise its nice to get hard to find OEM parts that keep me from using the printer!