Hotend Assembly - MP Select Mini V2 and Pro/V3

MALYAN

$0.00
SKU:
M200_V2-HOTEND-ASSBLY
Maximum Purchase:
5 units
Shipping:
Calculated at Checkout

Compatible with:

  • Monoprice MP Select Mini V2
  • Monoprice MP Select Mini Pro/V3
PLEASE READ:
This newer version of the hotend assembly is mostly the same as the previous version with a couple of small changes.
  • The connector on top of the heat sink uses a plastic insert and a horseshoe shaped clamp to secure the Bowden tube. The Bowden tube runs further into the heat sink.
  • The PTFE liner (inside the heat break/throat) is about half the length ~28mm (old version is ~51mm) but is still 3.5mm.
 
The 51mm PTFE liners available for purchase here can be used with the new version but would need to be cut using either something like a razer blade. Do not use scissors or similar as that would pinch and deform the tube. 28mm PTFE liners can be purchased upon request.
Everything on this version of the hotend assembly is the same as the previous version except for the parts mentioned above.
 
See the video below that explains the difference between the Select Mini V2's that have either the short and full length versions of the wires. If for some reason the video is missing here is a direct link: https://youtu.be/yuAJLGmFNOs

* The option without wire extensions is intended to be used with MP Select Mini V2 (and Pro/V3) that has connections within the tower. The plugs are located toward the top of the tower.
    The plugs are located toward the top of the tower. See the product images for a couple examples. 

** The option with wire extensions is intended to be used with MP Select Mini V2 that does not have the connections within the tower. This option will make it so there are connection points at the top of the tower for the heater and thermistor.

For customers that have accidentally purchased the short wire version from GigDigit, wire extensions can be purchased if they are available. The cost would be whatever the current differences is between the two versions plus ~$0.50 and shipping cost. Please email or use the Contact Us page and be sure to include your order number so that arrangements can be made.
For those that may have purchased a similar hotend assembly from another source "you get nothing! You lose!" and shame on you. Okay back to business. For these potential customers it is possible the wire extensions can be made available but the cost will be at least double the current price difference between the two versions plus shipping. Please use the Contact Us page to inquire on availability.

(Does NOT include the fanfan shroudfan shroud clips, hotend mount, or Bowden tube)

When connecting the plugs, please be sure to check that you connecting to the correct plug. Do not rely on the color of the plugs to determine if the correct plug is being used.

Videos Hide Videos Show Videos